CMM-4/7: now in Finland

On May 31, 2017, the CMM-4/7 unit started its operation in Helsinki (Finland). First it serviced a 400 MVA transformer.

CMM-4/7 is a multifunctional unit  – it has three modes of operation:

  • First the unit warms up and then it starts processing oil in degassing mode. In this mode, the oil is heated to a set temperature, filtered, degassed in vacuum and passes through fine filtration at the exit;
  • The unit heats and filtrates oil in a vacuum column without degassing;
  • The unit diagnoses good condition and serviceability of all components (valves, pumps, etc.).

CMM-4/7 units are used in enterprises engaged in installation and repair of oil-filled high-voltage equipment in workshops and on-site. The processing rate of this unit in degassing mode is 4 m3 / h , and in  heating and filtration mode is 7 m3 / h.

Processed oil parameters:

  • Volumetric gas content – below 0.1%;
  • Moisture content by weight – below 10 g / t;
  • ISO 4406 industrial purity class  – / 14/12;
  • Mechanical impurities content – below 8 g / t;
  • Filtration fineness -5 μm.

The unit is connected to the transformer by TSS (Transformer Security System) to monitor the oil level and to protect the transformer from oil leaks or breaking of hoses.

GlobeCore

Leave your request