Most frequently encountered contaminants in oil are water and solids. These contaminants are detrimental to the performance and life of the oil.Oil filtration stations are intended for filtration of industrial oils from mechanical impurities, free and partially dissolved water, carbon black, water soluble acids and alkalis. The plant is intended for any industrial, turbine, compressor, transformer etc. oils.
Parameters of oil after filtration:- removing of water, %- removing of mechanical contaminants, %- filtration fineness, μm
Oil temperature when operating, C0С
Oil heater power, kW
Installed capacity, kW
Power supply, V, three phase, 50 Hz
Dimensions, mm- length- width- height
*Power supply parameter as per clients’ requirement
PRINCIPLE OF OPERATON
Oil is fed from contaminated oil vessel by means of oil pump to heal heater, after heating it is fed to coarse filter. After coarse filter oil is processed by means of fine filters. Clean is fed to clean oil vessel.
You can adjust all of your cookie settings by navigating the tabs on the left hand side.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.