Oil purification systems – GlobeCore Oil purifier

tRANSFORMER OIL OURIFICATION SYSTEMS

WHEN IS IT TIME TO USE AN OIL PURIFICATION SYSTEM?

When transformer oil becomes contaminated, it loses its dielectric properties, its viscosity increases impairing heat exchange, and its stability against oxidation is reduced. Oil purification is a process designed to remove contaminants from the oil to preserve its performance.

GlobeCore offers a variety of design options for our oil purification units. They can be assembled in containers, installed on castor wheels or on trailers to enhance mobility for transformer service. Our units are a versatile tool for dielectric oil purification and pulling vacuum on transformers used extensively in the power industry.

The CMM-M unit by GlobeCore are designed to remove particulate matter, gas and water from oil. The unit performs one of the following three functions:

  •  Oil filtration
  • Filtration of oil in vacuum and with heating
  • Oil degassing

 

Oil Purifier System 160 litters

Oil purifier system 160 litters per hour

This unit uses vacuum to pull gas and water from the oil, while the filters remove particles from transformer and industrial oil.

  •        Oil life extension
  •        Fast high voltage equipment servicing
  •        Removal of particulate matter, water and gases
  •        Easy operation and maintenance
  •        Simple deployment and use.

Oil Purifier System 500 l/h

Oil purifier cart 500 litters per hour

The CMM-0.5 oil purifier incorporates replaceable filters, an oil pump, an oil heater, and a vacuum chamber with a vacuum pump. The unit is often used to process oil which has been exposed to air and water during transportation, which causes as much as 20-30% drop of breakdown voltage.

  •        Powered by a regular power socket
  •        Designed for simplicity of operation and maintenance
  •        Has in built protection against oil foaming and spilling
  •        Operates near-silently
  •        Small size

Oil Purifier System 600 l/h

Oil purifier cart 600 litters per hour

Particulate matter, water and gas are the most common impurities in transformer oil. They degrade the quality of the oil and shorten its life. GlobeCore units purify transformer oil by applying heat and vacuum to remove the impurities.

  •        Simple deployment and operation
  •        Removal of water and gases
  •        Extension of oil life
  •        Improvement of high voltage equipment reliability

oil purification

Oil purifier cart 1000 litters per hour

The CMM-0.1 by GlobeCore is a unit designed to remove particulate matter and other contaminants from transformer oil. In many cases these simple and reliable units have been in operation for over five years.

  •        Simple deployment and operation
  •        Improvement of high voltage equipment reliability
  •        Oil life extension
  •        Transformer life extension

CMM 2.2

Oil purifier unit 2200 litters per hour

The CMM range of oil purification products perform degassing, dehydration and filtration of various types of oil, such as transformer, industrial, turbine and cable oil. The units are commonly used when installing or servicing high voltage systems (i.e. transformers, substations, switches and OF cables), as well as industrial machinery and turbines.

  •        Oil degassing, dehydration and drying
  •        Transformer servicing simultaneous with oil purification
  •        Filling electrical systems with oil for the first time
  •        Optional trailer installation.
CMM4 (CMM6)

Oil purifier system 4000 litters per hour

CMM systems serve for degasification, dehydration and filtration of transformer, cable, turbine and other oils for removal of gases, free and soluble water and particulate matter.

  • Drying, degassing and filtration of oil
  • On site drying of transformer with simultaneous treatment of the oil
  • First filling of electrical apparatuses with insulating oil
  • As option can be mounted on roadworthy trailer

OIL PURIFICATION EQUIPMENT RANGE

GlobeCore offers a wide range of mineral oil purification systems, most commonly used for purification of electrical insulating oil, suitable for any specific application.

One important feature of our products is the capability to operate with energized transformers. To do so, the oil purification machine and the transformer are connected using a Transformer Safety System (TSS). This device takes a reading of oil level inside the transformer prior to operation and keeps the level unchanged throughout processing. Using quick coupling makes connecting GlobeCore’s oil purification systems to transformers incredibly simple.

Transformer oil often contains water that has a significant adverse effect on the quality and performance of the oil, decreasing breakdown voltage and accelerating aging. Our company offers a range of products for transformer oil filtration and purification. These systems rid the oil from water, gas and solid particles.

  •        Oil is processed under vacuum and with heating, evaporating water and extracting gases
  •        High quality filters almost entirely remove particulate matter
  •        Automatic control with all safety features
  •        Wide range of products for any size and processing rate requirements.

 

One of the most frequently encountered contaminant in oil is water. Water is detrimental to the life and performance of the dielectric oil. GlobeCore manufactures a complete line of Oil Purification Systems Filtration Equipment that removes this water contamination as well as other types of contamination, i.e. particulates and gases.

  • Vaporizes water from oil under vacuum.
  • Dehydrates, filters, purifies and de-aerates oils.
  • Self-policing system.
  • Numerous sizes and options are available.

Clean oil lives longer and performs better, protecting the transformer and its paper insulation, extending transformer service life and ensuring minimum down time for servicing.

  •        Complete oil purification solution packages
  •        Shipped units are ready for operation with minimum amount of preparations
  •        Options for enhanced mobility (roadworthy trailers, castor wheels etc)
  •        Versatility for performing multiple tasks.

The cart is ideally suited for servicing small volume transformers. All processes required for servicing electricity substation can be performed including gas removal, temporary oil storage, contaminant filtration to 0.1 micron, gas purification and drying, equipment evacuation and equipment re-pressurization. The cart is also ideally suited for consolidating partially-used SF6 bottles into one bottle.

Some of our client are:

our clients

обновлено: August 3, 2017 автором: producing