CMM-0.6
Transformer oil purification plant CMM-0.6 (600 L/H)
Benefits:
- Degases, Dehydrates, Removes Particles
- Extends Oil Life
- Saves HV Equipment Downtime
- Simple to Install & Use
APPLICATION
Most frequently encountered contaminants in transformer oil are water, gases and solids. These contaminants are detrimental to the performance and life of the oil. Oil purification equipment produced by GlobeCore is intended for purification of oils by means of thermo- vacuum process.
TECHNICAL PARAMETERS
|
№ |
Parameter |
Value |
|
1 |
Capacity, l/h |
600 |
|
2 |
Maximum oil output temperature in heating mode, С |
60 |
|
3 |
Oil feeding height refering to outlet fitting, m |
20 |
|
4 |
Oil heater power, kW |
14,4 |
|
5 |
Maximum oil heating conductor surface rating, W/cm2 |
0,5 |
|
6 |
Power capacity, kW |
18 |
|
7* |
Three phase VAC ~ 50 Hz, V |
400 |
|
8 |
Maximum dimensions, mm – length – width – height |
1400 700 1550 |
|
9 |
Maximum weight, kg |
320 |
* Power supply parameter as per clients’ requirement
GUARANTEED OIL PARAMETERS AFTER TREATMENT
|
Test method |
Before treatment |
After treatment |
|
|
Breakdown voltage |
IEC 60156 |
≤ 20 kV |
≥ 40 kV |
|
Water content |
ASTM D-1744-64 |
≥ 50 ppm |
≤10 ppm |
|
Gas content |
ASTM D-2945-71 |
Up to 12% |
≤ 1 ,5 % |
MODES OF OPERATION
The unit can be operated in the following modes:
- Heating and filtration
- Filtration, heating and thermo-vacuum purification